WangDat 3400DX Specifications

WangDAT 3400 DAT drives offer you unparalleled connectivity, capacity and performance for backup and archival applications. Compatible with a wide variety of third-party software packages for many operating systems, WangDAT 3400 tape drives can be used to back up large networks, multi-user systems and powerful workstations. WangDAT 3400 drives are available in both internal and external configurations.

KEY FEATURES

• 8 GB capacity with data compression, 4 GB native capacity
• 44 MB/min. backup speed - typical
• Compatible with SCSI controllers for ISA, EISA, and Microchannel computers
• Supports SCSI-1 and SCSI-2 interface
• Hardware data compression is performed automatically by the tape drive for maximum performance
• 1 MB buffer with full parity
• Downloadable firmware using Flash Memory technology
• Built-in self activated head cleaner

Specifications

Capacity 120 meter DAT Tape 4GB(native) 8GB*(compressed) 90 meter DAT Tape 2GB(native) 4GB*(compressed) Performance*** Transfer Rate (KBytes/Second) 366(native) 732(compressed)** Synchronous burst transfer rate 4.6MB/sec. Asynchronous burst transfer rate 4.0MB/sec. Backup speed (max.) 22MB/min.(native) 44MB/min.(compressed) Search speed 40 sec. avg. (120M tape) Buffer size 1MB Data Recording Recording format DDS-2 or DDS-1 standard Data compression DDS-DC (in hardware) Head configuration 4-head read after write Linear recording 61,000 bits/inch Interface SCSI-1 or SCSI-2 Reliability Error rate MTBF > 180,000 hours, 30% motion Drive cleaning every 8-10 hrs.

Environmental Operating temp 4 to 45 C (41-113 F) Non-operating temp -30 to 60 C (-22-140 F) Relative humidity 20-80% non-condensing Internal model Dimensions(inches) 1.625Hx4Wx7.75D Certifications FCC Class B, UL, CSA Power Voltage +5V+/-5%, +12V+/-10% Current 1.0A(max.), 5V - 0.85A(max.), 12V External model Dimensions(inches) 5.2Hx3.5Wx13.3D Certifications FCC Class B, UL, CSA Power Supply Input Voltage 90 to 260V autosensing Frequency 47 to 440Hz Connectors 2 Centronics SCSI female SCSI addresses 0-6, external switch Weight (Drive/Shipping) External 4.9/7.5 lbs Internal 2.0/3.0 lbs.

* Assumes a 2:1 data compression ratio, which is average assuming a typical data mix. Actual compression results will vary. Compression is performed by the tape drive. Compression ratios are data dependent
** Performance shown is maximum for the tape drive assuming a 2:1 compression ratio.
*** Actual performance may be limited by CPU speed, available memory, disk speed, network throughput, software, compression ratio, adapter and other factors.